Paperless Recorder - Cards

4x Analogue output

Analogue outputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.

.

Description Range Features

4x ANALOGUE OUTPUT
isolated

4 channels
0…5 / 0…20 mA, 4…20 mA
0…5 / 10 V
±5 / ±10 V

ACCURACY
±0,1 % of range

RATE

RESOLUTION
16 bits

3x Universal input

Universal inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

3x UNIVERSAL INPUT
isolated

3 channels

DC ±60/±150/±300/±1200mV
PM 0…5/20 mA/4…20 mA
  ±2/±5/±10/±40 V
OHM 0…100 Ω/1/10/30 kΩ
RTD Pt 50/100/500/1 000
CU Cu 50/Cu 100
NI Ni 1 000/Ni 10 000
T/C J/K/T/E/B/S/R/N/L
DU

Linear potentiometer

ACCURACY
±0,15 % of range

RATE

RESOLUTION
24 bits

 

12x Analogue input, current

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

12x CURRENT INPUT

12 channels

PM 0…5/20 mA/4…20 mA
  ±5/±20 mA

ACCURACY
±0,2 % of range

RATE

RESOLUTION
16 bits

2x Analogue output

Analogue outputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

2x ANALOGUE OUTPUT
isolated

2 channels
0…5 / 0…20 mA, 4…20 mA
0…5 / 10 V
±5 / ±10 V

ACCURACY
±0,1 % of range

RATE

RESOLUTION
16 bits

PROFIBUS

The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.

Description Range Features

DATA OUTPUT
isolated

 

PROTOCOL
PROFIBUS DP

RATE
9,6…12 000 kbit/s

PROFINET

The data communication plug-in card for the OMR 700 is fully isolated  from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.

Description Range Features

DATA OUTPUT
isolated

 

PROTOCOL
PROFINET

RATE
100 Mbit/s

4x Excitation

Excitation plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

4x EXCITATION
isolated

4 channels
0…5 / 10 / 12 / 24 V
3 W - channel

ACCURACY
±2 % of range, ±0,2 V

EFFICIENCY

RESOLUTION
16 bits

4x Analogue input

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Popis Range Features

4x PROCESS MONITOR
isolated

4 channels

PM 0…5/20 mA/4…20 mA
  ±2/±5/±10/±40 V

ACCURACY
±0,2 % of range

RATE

RESOLUTION
16 bits

4x Pt xxx/Cu xxx/Ni xxx

Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

4x INPUT FOR RESIST. SENSORS
isolated

4 channels

OHM 0…100 Ω/1/10/30 kΩ
RTD Pt 50/100/500/1 000
CU Cu 50/Cu 100
NI Ni 1 000/Ni 10 000

CONNECTION
2- or 3-wire

ACCURACY
±0,2 % of range

RATE
5…320 measur./s

RESOLUTION
16 bits

4x T/C - J/K/T/E/B/S/R/N/L

Plug-in card for measuring termocouple sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

4x INPUT FOR TERMOCOUPLES
isolated

4 channels

T/C J/K/T/E/B/S/R/N/L

COLD JUNCTION COMPENS.
Automatic

ACCURACY
±0,2 % of range

RATE
5…320 measur./s

RESOLUTION
16 bits

5x Pt xxx/Cu xxx/Ni xxx

Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

5x INPUT FOR RESISTANCE SENSORS
 

4 channels

OHM 0…100 Ω/1/10/30 kΩ
RTD Pt 50/100/500/1 000
CU Cu 50/Cu 100
NI Ni 1 000/Ni 10 000

CONNECTION
2-, 3- or 4-wire

 

ACCURACY
±0,2 % of range

RATE
5…320 measur./s

RESOLUTION
16 bits

12x Analogue input, voltage

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

12x VOLTAGE INPUT

12 channels

PM 0…2/5/10/40 V
  ±2/5/10/40 V

ACCURACY
±0,2 % of range

RATE

RESOLUTION
16 bits

2x Input for strain gauges

Plug-in card for strain gauges measurement is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

2x INPUT FOR STRAIN GAUGES

isolated

2 channels

LC 0…4/2…8/4…16 mV/V

SENSOR POWER SUPPLY
10 VDC, load ≥ 80 Ω

SENSOR CONNECTION

6-wire

ACCURACY
±0,05 % of range

RATE
5…100 measur./s

RESOLUTION
24 bits

3x Precise analogue input 

Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

3x PROCESS MONITOR
isolated

3 channels

PM 0…20/4…20 mA, ±20 mA
  0…5/10 V, ±5 V, ±10 V

ACCURACY
±0,02 % of range

RATE

RESOLUTION
24 bits

2x AC voltage/current, Power

Plug-in card for measurements of voltage (VRMS), current (ARMS), frequency (Hz), power P, Q, S, and cos fi for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

2x AC INPUT
isolated

voltage (VRMS), current (ARMS), frequency (Hz)power P, Q, S, and cos fi

2 channels

U  0…120 V/0…250 V/0…450 V
I

0…1 A/0…5 A

ACCURACY
±0,3 % of range

RATE

 

8x AC/DC Control inputs

The A/D inputs plug-in card for control/measurement of the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

8x AC/DC CONTROL INPUTS

8 channels

AC

0…30 / 120 / 250 V

DC

0…30 / 120 / 250 V

 

±30 / ±120 / ±250 V

ACCURACY
±1 % of range (DC)
±5 % of range (AC)

RATE

12x UP/DW Counter - frequency

Universal counter plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

12x UNIVERSAL COUNTER

UP/DW counter
frequency
time

12 channels

UC

5 / 10 / 12 / 24 / 30 V

 

NPN/PNP/Contact

  0,1 Hz…10 kHz

ACCURACY
±0,05 %of range

FUNCTIONS
edge selection
input filter
time measurement

Preset
Tare

2x UP/DW Counter - frequency, IRC

Universal counter plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.

Description Range Features

2x UNIVERSAL COUNTER

UP/DW counter, IRC
frequency, IRC
time

2 channels

UQC

5 / 10 / 12 / 24 / 30 V

 

NPN/PNP/Contact

 

SENSOR POWER SUPPLY
5 / 24 VDC,

ACCURACY
±0,05 % of range

FUNCTIONS
edge selection
input filter
time measurem.
Preset
Tare

1x 3-F Wattmeter

Plug-in card for measurements of 3-phase power, voltage (VRMS), current (ARMS), frequency (Hz), power P, Q, S, harmonic distortion, angle and cos fi for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Range Features

1x 3-F Wattmeter
isolated

voltage (VRMS), current (ARMS), frequency (Hz)
power P, Q, S, harmonic distortion, angle, and cos fi

3 channels

U  0…250 V
I

0…1/ 5 A

ACCURACY
±0,3 % of range

RATE

4x SPDT relay

Relay output plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Type Features

4x OUTPUT, RELAY
 

4x SPDT relay

LOAD
250 VAC / 30 VDC / 3 A

RATE

8x Normally open relay

The plug-in card with relay output for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Type Features

8x OUTPUT, RELAY
 

8x Normally open relay

LOAD
250 VAC / 30 VDC / 3 A

RATE

8x Open collector NPN

Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Type Features

8x OUTPUT, OPEN COLLECTOR
 

8x NPN Open collector
ON/OFF/PWM

DUTY
30 VDC / 300 mA, 9 W

RATE

16x Open collector NPN

Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
 

Description Type Features

16x OUTPUT,OPEN COLLECTOR
 

16x NPN Open collector with common clamp
ON/OFF/PWM

LOAD
30 VDC / 300 mA, 9 W

RATE

8x Open collector PNP

Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements

Description Type Features

8x OUTPUT, OPEN COLLECTOR
 

8x PNP Open collector
with short-circuit and overload protection
ON/OFF/PWM

LOAD
12…30 VDC / 700 mA, 21 W

RATE