OMC 8000

OMC 8000

A modular architecture was chosen for the OMC 8000 PLC series. The core of the PLC is the main module, to which expansion modules up to 31 can be connected. These can be located in close proximity or remotely. The distance between the farthest modules can be up to 40 m. Communication between the modules is ensured by the CAN line. However, with the growing number of modules, it is necessary to take into account the growing demands on communication between them.

The main module can be powered by 230 V or 24 V. It contains three digital inputs that respond to the supply voltage level. It also contains six universal inputs, which are isolated from the power supply and outputs with a common ground terminal.

These inputs allow the connection of the following signals:
• pulse up to 30 V
• impulse - contact, NPN open collector
• analog, voltage up to 30 V
• analog, current up to 20 mA
• analog, resistance up to 3900 Ω
• analog, Pt 100, Pt 1000, Ni 1000
• analog, T / C - B, E, J, K, L, N, R, S, T, XK
• analog, KTY81-2xx

Input
[ ??? ]
Number of inputs
3 vstupy
6 vstupů
Comparators
Type
Digitální
Data outputs
Protocol
MODBUS - RTU, ASCII
Data format
8 bits + no parity + 1 stop bit (ASCII)
Rate
600…230 400 Baud
Analogue outputs
Type
Isolated, programmable with a 16-bit D / A converter, type and range are menu selectable
Nonlinearity
±0,1 % of range
Temperature coefficient
15 ppm/°C
Rate
response to value change < 1 ms
Mechanical properties
Material
PA 66, non-inflammable UL 94 V-I (blue)
Dimensions
72 x 91 x 60 mm (š x v x h)
Operating conditions
Connection
terminal board, cable section < 2,5 mm2
Stabilization period
within 15 minutes after switch on
Operating temperature
-20°…60°C
Storage temperature
-20°…85°C
El. safety
EN 61010-1, A2
EMC
EN 61326-1
[ ??? ]
Can supply
550 mA
Can supply
350 mA
Can supply
300 mA
Can supply
200 mA
Can supply
350 mA
Can supply
600 mA
Finished
YES
Logic Input PNP 10-30Vac/dc
Logic Input 100-250 Vac
Logic Input PNP, contact
Logic Input PNP 3V
Logic Input PNP 10V
Logic Input PNP 20V
Logic Input PNP 30V
Quadrature without RST, NPN
Quadrature without RST, PNP 3V
Quadrature without RST, PNP 10V
Quadrature without RST, PNP 20V
Quadrature without RST, PNP 30V
Quadrature with RST, NPN
Quadrature with RST, PNP 3V
Quadrature with RST, PNP 10V
Quadrature with RST, PNP 20V
Quadrature with RST, PNP 30V
Relay 10A 250Vac
Relay 10A 250Vac
OC NPN 300mA 30V
OC NPN 300mA 30V
Analogue output 16 bit, U/I
Voltage input 60mV
Voltage input 450mV
Voltage input 2.8V
Voltage input 10V
Voltage input 20V
Voltage input 30V
RS485, MODBUS master
RS485, MODUBS slave
RS485, OM ASCII master
RS485, OM ASCII slave
RS485, UNI master
Frequency up to 3kHz, PNP 30V
Frequency up to 3kHz, PNP 20V
Frequency up to 3kHz, PNP 10V
Frequency up to 3 kHz, PNP 3V
Frequency up to 3 kHz, NPN
KTY81 2xx
Current input 0-20mA
Current input 4-20mA
Ni1000 5000ppm
Ni1000 6180ppm
Pt100 EU
Pt100 RU
Pt100 US
Pt1000 EU
Resistance 3k9 Ohm
Resistance 390 Ohm
TC_B
TC_E
TC_J
TC_K
TC_L
TC_N
TC_R
TC_S
TC_T
TC_XK
Accuracy class
0,2 %
Input ADC resolution
12 bit
Ucc
Images
Connection
Dimensions and installation
To assemble the order, first select the desired instrument configuration.
OMC 8000-??-??
Power supply
Any
?
Any
?
10...30 V AC/DC
0
80...250 V AC/DC
1
Outputs
Any
?
Any
?
žádný
0
5x otevřený kolektor
1
5x relé
2
3x OC + Analogový výstup
3
3x relé + Analogový výstup
4
Analogový výstup
5
specification
Any
??
Any
??
0
00
Selected combination is invalid
Alternatives in stock
OMC 8000-01-PSIn stock < 5 pcs
OMC 8000-12-00In stock < 5 pcs